Pairing your Axon Flex 2 with a mobile device

Note

The Axon Flex 2 camera is shipped with pairing enabled, but your agency administrator can turn the feature off.

You must have Axon View installed on your mobile device before you can pair with your camera.

  • Video – Pairing Axon Flex 2 with an iOS device
  • Video – Pairing Axon Flex 2 with an Android device
  1. With the camera connected to the controller, turn on the Axon Flex 2 controller.
  2. Open the Axon View app on your mobile device.
  3. Tap Flex 2 and initiate pairing.
  4. On the controller, hold down the Function and EVENT buttons for five seconds.
  5. Wait until you hear four beeps.
    • The Function LED on the controller and the camera LED will blink green.
  6. Follow the onscreen instructions on your mobile device.

Pairing with an iOS device

Follow the steps above to initiate pairing, then complete pairing within the Axon View app on your iOS device.

Pairing with an Android device

Follow the steps above to initiate pairing, then complete pairing within the Axon View app on your Android device.