Changing Vibration Settings

During normal operation, Axon cameras emit beeping sounds, called audio prompts, and vibrations (haptic feedback) to notify you of the system status.

For some situations, you may wish to turn off the vibrations for your camera. If allowed by your agency, you can turn vibration on or off using Axon View (if your camera is paired), Evidence.com, or Evidence Sync software.

Turn Vibration On or Off Using Axon View

1. Ensure your Axon camera is turned on and paired with your mobile device.
2. Open the Axon View app on your mobile device.
3. Tap the Settings icon in the upper-left corner.
4. Under the Camera section:
   • On iOS, toggle Vibration.
   • On Android, toggle Haptic Feedback.

• If the switch is toggled to the right, vibration is enabled.
• If the switch is toggled to the left, vibration is disabled.

Turn Vibration On or Off Using Evidence.com

Note: You must have Device Administration permission to manage device settings in Evidence.com. If you do not have this permission, contact your administrator.

1. Sign in to your Evidence.com account.
2. Click Devices in the menu bar, then select My Devices.
3. Click the Serial Number of your camera.
4. On the Device Profile page, select the Settings tab.
5. Select On or Off for Vibration.
6. Click Save Settings.

The updated setting will take effect the next time the camera is docked.

Turn Vibration On or Off Using Evidence Sync

1. Connect your camera to the Evidence Sync application.
2. Sign in to Evidence Sync.
3. Select the Device Settings tab.
4. Select On or Off for Vibration.
5. Save the setting change.