Cleaning and maintenance
Regular cleaning of your Axon Outpost helps maintain performance, image quality, and long-term reliability. Follow the guidelines below to clean the device safely without damaging the housing, lenses, or internal components.
Approved cleaning methods
- Use a soft, lint-free cloth that is lightly dampened (not wet) to clean the exterior surfaces of the device.
- Use isopropyl alcohol (70% or higher) for cleaning. Apply to a cloth or, for small or hard-to-reach areas, a cotton-tipped applicator—do not apply pour it directly on the device.
- After cleaning, allow the device to air dry completely or gently dry it with a clean, lint-free cloth before returning it to service.
Chemicals and practices to avoid
- Do not use harsh or abrasive cleaners or solvents, including acetone, benzene, or similar chemicals.
- Do not use ammonia-based cleaners (such as glass cleaners containing ammonia) as they may damage device surfaces or lenses.
- Do not immerse the device in water or any cleaning solution.
- Do not spray liquids or cleaning agents directly on the device.
- Do not allow liquids to pool on or enter any openings in the device.
Special considerations
Isopropyl alcohol is suitable for cleaning organic material, such as blood or other biological contaminants.
If the device is heavily contaminated, follow your organization’s established biohazard handling procedures, which may include removing the device from service.
These instructions are intended for routine cleaning only. For questions about specific cleaning agents or unusual contamination, contact Axon technical support.
Cleaning reference summary
| Cleaning Method or Chemical | Approved | Notes |
|---|---|---|
| Soft, damp cloth | Yes | Preferred for routine cleaning |
| Isopropyl alcohol (≥70%) | Yes | Apply to cloth or applicator only |
| Cotton-tipped applicator | Yes | Use for small or recessed areas |
| Ammonia-based cleaners | No | May damage surfaces or lenses |
| Harsh solvents | No | May damage device materials |
| Water immersion | No | Do not submerge device |
| Direct liquid spray | No | Do not spray directly on device |
Following these guidelines will help preserve the appearance and functionality of your Axon Outpost device over time. For additional assistance, contact Axon technical support.
