Technical information

Technical support

Visit Axon technical support for support options or call 800-978-2737.

Warranty

Axon Enterprise, Inc. warranty provisions are applicable on Axon Outpost products. See www.axon.com/legal for detailed warranty information.

This warranty does not apply, and Axon shall not be liable for any loss, loss of data, damage, or other liability arising out of:

  1. Damage caused by failure to follow instructions regarding the use of the product;
  2. Damage caused by the use of non-Axon products or the use of cartridges, batteries or other parts, components or accessories not manufactured or recommended by Axon;
  3. Damage caused by abuse, misuse, intentional or deliberate damage to the product, or force majeure;
  4. Damage to a product or part that has been repaired or modified by persons not authorized by Axon or without Axon's written permission, or
  5. If any Axon serial number has been removed or tampered with.

Thus, any handling of the camera that alters the condition of the equipment by unauthorized personnel without proper technical training may result in the immediate loss of the manufacturer's standard warranty coverage by impacting the integrity of the equipment and rendering the quality testing performed by specialized technical personnel impossible after handling the equipment.

Warnings

For a full list of the warning associated with this product, see www.axon.com/legal.

Radio waves

The camera system transmission is in the frequency ranges of 2402–2480 MHz, 2412–2462 MHz, 5150–5350 MHz, 5470–5725 MHz, and 5725–5850 MHz. Additionally, depending on the model number and country, it may transmit in the frequencies listed below:

AX1054: LTE B2 (1850-1910 MHZ), LTE B4 (1710-1755 MHz), LTE B5 (824-849 MHz), LTE B7 (2500-2570 MHz), LTE B12 (699-716 Mhz), LTE B13 (777-787 MHz), LTE B14 (788-798 MHz), LTE B30 (2305-2315 MHz), and LTE B66 (1710-1780 MHz).

FCC compliance statement

Caution! Changes or modifications to the equipment not expressly approved by the manufacturer could void the product warranty and the user’s authority to operate the equipment.

FCC radiation exposure statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Part 15B

This equipment model AX1054 has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

ISED Canada compliance statement

IC radiation exposure statement

This equipment model AX1054 meets the exemption from the routine evaluation limits in section 2.5 of RSS-102 and complies with RSS-102 RF requirements. Users can obtain Canadian information on RF exposure and compliance from the Innovation, Science, and Economic Development (ISED) Canada website.

Ce modèle d'équipement AX1054 est exempté des limites courantes d’évaluation de la section 2.5 de la norme RSS-102 et est conforme aux exigences d’exposition RF de la norme RSS-102. Les utilisateurs peuvent obtenir l’information canadienne sur l’exposition et la conformité RF sur le site Web d’Innovation, Sciences, et Développement économique Canada (ISDE).

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

Wi-Fi 5G warning

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Les dispositifs fonctionnant dans la bande de 5150 à 5250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.

Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e..

For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.

Section 8.4 of RSS-GEN

This equipment model AX1054 complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

Systèmes Axon (modèle AX1054) est conforme aux normes d'exemption de licence RSS d'Industrie Canada. Son utilisation est soumise aux conditions suivantes: 1) cet appareil ne doit pas causer de brouillage, et 2) doit accepter tout brouillage, y compris le brouillage pouvant entraîner un fonctionnement indésirable.

This digital apparatus complies with Canadian ICES-003 Class A.

Cet appareil numérique est conforme à la norme canadienne NMB-003 Classe A.

THIS AXON SYSTEM MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

CE SYSTÈME AXONE RÉPOND AUX EXIGENCES DU GOUVERNEMENT EN MATIÈRE D'EXPOSITION AUX ONDES RADIO.

Compliance marks

Also see axon.com/legal/compliance-documentation.

FCC ID – X4GS06009

IC – 8803A-S06009

Shows the previously noted compliance mark.

 

Cleaning and maintenance ï this topic

You've reached the last topic in this series on Axon Outpost (yay you!).

To start with the first topic, see Introduction.

Or, return to the product page.