Vehicles configuration
This
Vehicle configuration settings are only available to agencies that use Axon Fleet.
Configure vehicle information in Axon Evidence so Axon View XL can connect and Fleet cameras can upload videos. The mobile data terminal/computer (MDT/C) in the vehicle uses the SSID information to connect to Axon Evidence.
Watch this video for an overview of building vehicles with Fleet 3 devices.
Add a Fleet 3 vehicle
- On the menu bar, select Inventory > Vehicles.
- Select Guided Vehicle Creation and then Fleet 3.
- Enter a Vehicle Name the vehicle and select Create Vehicle.
- In the Fleet Hub row, select Assign.
- Enter the serial number of the Fleet hub installed in the vehicle and select Assign.
- To add another vehicle, repeat the previous steps.
Add a Fleet 1 or 2 vehicle
- On the menu bar, select Inventory > Vehicles.
- Select Create Vehicle and then Fleet 1 or 2.
- Enter a Vehicle Name and then Save and Continue.
- Enter the serial number for the Axon Signal Vehicle associated with the vehicle and select Save and Continue. An Axon Signal Vehicle serial number begins with X87.
- If applicable, enter the serial numbers for the Axon Fleet power units associated with the Fleet Camera front and back mounts, then select Save and Continue.
- Enter the SSID (case-sensitive and used by the MDT to connect to Axon Evidence) and Password for the vehicle and select the Authentication Type.
- Select the wireless offload switch if appropriate. If disabled, the Fleet camera must be manually removed from the vehicle and docked to upload videos to Axon Evidence.
- Select Save and Complete.
- To add another vehicle, select Add Another and repeat from step 3.
Add multiple vehicles
Use a comma-separated value (csv) file to add multiple vehicles at once. This requires the same information as when adding a single vehicle. The file must have seven columns and the first row must contain the header information for the file, as shown here:
- Vehicle Name – A unique name for the vehicle.
- Signal – The serial number for the Axon Signal Vehicle unit for the vehicle. This serial number begins with X87.
- Front Mount – The serial number for the Axon Fleet Power Unit connected to the front camera. This serial number begins with X85.
- Rear Mount – The serial number for the Axon Fleet Power Unit connected to the rear camera. This serial number begins with X85.
- SSID – The case-sensitive Service Set Identifier (SSID) for the network used by the vehicle.
- Password – The network password.
- Wireless Offload – TRUE if the vehicle will use wireless offload, FALSE or blank if not.
To import the CSV:
- On the menu bar, select Inventory > Vehicles.
- Select Bulk Creation.
- Optional: select Download Template to download a sample CSV; delete or overwrite the sample data in the second row.
- If or when your CSV is ready, select Choose File or drag the CSV file inside the dashed box.
- Review the vehicle information and select an entry if a correction is necessary. Use Delete to remove a vehicle row.
- Select Create x Vehicles to create the new vehicles.
Edit vehicle information
- On the menu bar, select Admin > Devices > Vehicles.
- Select the Vehicle Name you want to edit. Optionally, use the Search box to narrow the list of vehicles.
- On the vehicle page, select Edit for the information you want to change.
- Enter the updated information. Remember that SSID is case-sensitive. Select Save and Continue (or Save and Complete).
- If needed, edit the next set of information.
- Once all edits are completed, you can go to any other Evidence.com page.